Rubber profiles
Individual rubber profiles for cleaning machine manufacturers.
We are specialized in rubber profile special designs, we have been producing customized profile solutions for cleaning machine production for over 50 years. The rubber profiles are produced by extrusion. Extruders are used to press the rubber mixture through a mouthpiece with the desired cross section/profile. If you need an individual profile with a special geometry and material quality, our specialists will be happy to assist you in designing the optimum rubber profile.?
Frequently asked questions (FAQ)
This depends on the cross-section, the type of material and various other factors. As a rule of thumb, however, one can assume that rubber is approx. 25 running metres.
This in turn depends on many different factors. For rubber profiles, the prices usually range from CHF 500.00 to 1500.00
It is best to provide as much information as possible! For example, as there are: Material, drawings, samples, sketches of the problem to be solved, required quantity, requirements regarding chemical resistance, temperature range, colour, fire protection regulations, approvals (e.g. food), etc.
We can also supply glued, welded or vulcanised rings and frames, sections to fixed lengths, etc. Even self-adhesive finished profiles are no problem.
Strips of cellular rubber or rubber, flat seals, milled profiles, moulded parts, etc. are often a sensible alternative.
Rubber profiles, especially in contrast to metals, have relatively large permissible dimensional tolerances (ISO 3302-1 E2 or E3 for cellular rubber). The wall thickness is best kept to a minimum of about 0.8 - 1.0 mm. For some rubber qualities, 0.5 mm is also possible, but not thinner. Extruded profiles never have sharp edges, i.e. there is always a certain radius and precise, especially right angles, do not exist. A constructive solution must be found here. For example with a certain suit.