>

PUR polyether flat foams | 30 kg/m³ PU ether foam, anthracite

PUR polyether flat foams
18 kg/m³ PU ether foam, white
22 kg/m³ PU ether foam, yellow
23 kg/m³ PU ether foam, black
25 kg/m³ PU ether foam, anthracite
26 kg/m³ PU ether foam, white
30 kg/m³ PU ether foam, anthracite
30 kg/m³ PU ether foam, light blue
30 kg/m³ PU ether foam, white
30 kg/m³ PU ether foam, lavender
32 kg/m³ PU ether foam, green
36 kg/m³ PU ether foam, blue
53 kg/m³ PU ether foam, white

Soft PU ether foam is well suited for the upholstery area or in foam packaging for protection during transport.

Soft, flexible PU ether foam with a density of 30 kg/m³ and an open-cell structure. The anthracite material complies with a B1 fire certificate and is well suited as a packaging or upholstery material. We offer the PE foam in standard sheets of different thicknesses or in custom dimensions on request.

Media

Key features

  • Fire recistance MVSS 302
  • Fire recistance UL 94
  • open cell

Application areas

  • Transport packaging protection
  • Disposable packaging for lightweight packaged goods
  • Upholstery
PUR cut to size 30 kg/m³
Foam custom-made anthracite
Foam water-jet cut
PUR foam blocks

Frequently asked questions (FAQ)

If you would like to cut the foam to size yourself, there are various possibilities to cut the edges straight and clean. Foam can be cut mechanically with a band saw with a fine-toothed or toothless blade. Foam with a thickness of 20 mm - 30 mm can still be cut very well with sharp scissors. However, if you want to cut thicker foam, you will get very good results with an electric meat knife. Due to the two counter-rotating blades, the material is cut very precisely and cleanly. If you do not have an electric knife at hand, you can also use a conventional bread knife. The bread knife should have a serrated edge. Cutters or meat knives with a smooth blade are not recommended, because the knife becomes dull very quickly and you get frayed edges. a little vegetable oil on the recommended knife blade helps to simplify the cut. Another possibility: So that a "clean" cut is possible, it is advisable to treat the foam with some pressure (using a ruler) and compressit as much as possible to "0" and in this condition use a sharp Cutter to cut through in one go.
The foam standard boards are delivered as untrimmed raw boards. The ordered useful dimensions are guaranteed, protruding material (foam, fleece, SK-foil ecc.) is but possible."
According to your specifications, we can produce almost all geometries on our wide range of processing options such as punching, water jet cutting, contour cutting, shape cutting or cutting plotter. Which process is best suited for the desired foam cutting depends on the foam used as well as the required quality and quantity.
© 2025 Copyright by P/Card International AG

By using this website, you consent to the use of cookies and our privacy policy. Privacy policy agree.
If you have any questions, please contact info@vibraplast.ch

This content is reloaded