>

PUR polyether flat foams | 26 kg/m³ PU ether foam, white

PUR polyether flat foams
18 kg/m³ PU ether foam, white
22 kg/m³ PU ether foam, yellow
23 kg/m³ PU ether foam, black
25 kg/m³ PU ether foam, anthracite
26 kg/m³ PU ether foam, white
30 kg/m³ PU ether foam, anthracite
30 kg/m³ PU ether foam, light blue
30 kg/m³ PU ether foam, white
30 kg/m³ PU ether foam, lavender
32 kg/m³ PU ether foam, green
36 kg/m³ PU ether foam, blue
53 kg/m³ PU ether foam, white

PU ether upholstery foam for chairs, benches, pallet lounge, or as packaging foam.

Soft, ultraflexible PU ether foam with a density of 26 kg/m³ and an open-cell structure. The white material is flame-retardant and is well suited as an upholstery foam for chairs, benches, or as a packaging material. We offer the PE foam in standard sheets of different thicknesses or in custom dimensions on request.

Media

Item no.
  		Label
  		Surface
  		Length
mm 		Width
mm 		Thickness
mm 		Color
  		Bulk density
kg/m³ 		Detail
  		Basic price
/m² 		Price
/pce 		Delivery period
  		Graduated price
  		quantity
  		 
  		 
 

Key features

  • closed cell

Application areas

  • Transport packaging protection
split foam block
water-jet cut foam
Foam colour white
foam 26 kg/m³

Frequently asked questions (FAQ)

If you would like to cut the foam to size yourself, there are various possibilities to cut the edges straight and clean. Foam can be cut mechanically with a band saw with a fine-toothed or toothless blade. Foam with a thickness of 20 mm - 30 mm can still be cut very well with sharp scissors. However, if you want to cut thicker foam, you will get very good results with an electric meat knife. Due to the two counter-rotating blades, the material is cut very precisely and cleanly. If you do not have an electric knife at hand, you can also use a conventional bread knife. The bread knife should have a serrated edge. Cutters or meat knives with a smooth blade are not recommended, because the knife becomes dull very quickly and you get frayed edges. a little vegetable oil on the recommended knife blade helps to simplify the cut. Another possibility: So that a "clean" cut is possible, it is advisable to treat the foam with some pressure (using a ruler) and compressit as much as possible to "0" and in this condition use a sharp Cutter to cut through in one go.
© 2024 Copyright by P/Card International AG

By using this website, you consent to the use of cookies and our privacy policy. Privacy policy agree.
If you have any questions, please contact info@vibraplast.ch

This content is reloaded