>

Rubber sheets, CR/SBR chloroprene | CR/SBR 50° +/-5° Shore rubber sheets

Rubber sheets, CR/SBR chloroprene
CR/SBR 50° +/-5° Shore rubber sheets
CR/SBR 65° +/-7° Shore rubber sheets
CR/SBR 80° +/-7° Shore rubber sheets
CR/SBR 65° +/-7° Shore with 1 insert rubber sheet

CR/SBR rubber sheets 50° Shore +/- 7° Shore with extraordinary mechanical and elasticity properties.

The 50° Shore +/- 7° Shore CR rubber sheets have very good mechanical properties and good elasticity, with impressive resistance to wear, ozone, weather, chemicals, and aging. Whether in rolls, as tapes, or in custom dimensions, we guarantee you fast delivery thanks to our quality selection in stock and efficient production chain.

Media

Item no.
  		Label
  		Quality
  		Roll length
mm 		Width
mm 		Thickness
mm 		Shore-hardness
° Sh A 		Color
  		Basic price
/m² 		Price
/lfm 		Stock
  		Graduated price
  		Quantity in rm.
  		 
  		 
 

Areas of application

  • Processing machines:
  • Vehicle construction
  • Device construction
  • Production rooms

Key features

  • high abrasion resistance
CR/SBR rubber sheets
Rubber - Strips of CR-SBR
Rubber sheets Hardness: 50° Shore
CR Neoprene rubber flat gaskets

Frequently asked questions (FAQ)

Neoprene is a brand of the DuPont company and is a CR chloroprene synthetic rubber. The abbreviation of chloroprene rubber is CR. Vibraplast AG has no CR neoprene in its product range but a comparable commercial CR rubber with similar quality characteristics. Consult our technical data sheet in our online shop and compare the properties of our CR rubber quality.
Different types of adhesive can be used for bonding rubber. The choice of the right adhesive for rubber depends on the mixture of the respective rubber, therefore it is advisable to test it on a small area before gluing the rubber over the entire surface. In our online shop page https://www.vibraplast.ch/de/gummi-kunststofftechnik/Klebstoffe you will find a range of superglues for gluing rubber to each other or for bonding with different material combinations. The following elastomers/rubbers have proven to be suitable for bonding with superglue: EPDM (ethylene-propylene-diene rubber) NR (natural rubber) CR (Cloroprene rubber neoprene) IIR (isobutylene-isoprene rubber) SBR (styrene-butadiene rubber) NBR (nitrile butadiene rubber) Rubber bondings with superglue have the advantage that it hardens in a few seconds and the adhesive bond can be loaded immediately. The following advice for bonding rubber should be observed: clean surface no double-sided adhesive application a glueing gap as thin as possible in the case of mitre-cut gluing or butt gluing, ensure a straight, smooth and fresh cut skin contact should be avoided if possible, wear latex gloves if possible
© 2024 Copyright by P/Card International AG

By using this website, you consent to the use of cookies and our privacy policy. Privacy policy agree.
If you have any questions, please contact info@vibraplast.ch

This content is reloaded